skip to main content
Support   /   Support center   /   FAQs   /  What else do I need to do to configure or diagnose iSCSI?
  
What else do I need to do to configure or diagnose iSCSI?
iSCSI sessions can occur with hosts or remote storage arrays in an asynchronous mirror relationship. The following tables list the System Manager functions that you can use to configure and manage these iSCSI sessions.
NOTE: The iSCSI settings are only available if your storage array supports iSCSI.
 
Configure iSCSI
Action
Location
Manage iSCSI settings
1. Select Settings > System.
2. Scroll down to iSCSI settings to view all the management functions.
Configure iSCSI ports
1. Select Hardware.
2. Select Show back of shelf.
3. Select a controller.
4. Select Configure iSCSI ports.
Set the host CHAP secret
1. Select Settings > System.
2. Scroll down to iSCSI settings, and then select Configure Authentication.
or
1. Select Storage > Hosts.
2. Select a host member.
3. Click View/Edit Settings > Host Ports tab.
 
Diagnose iSCSI
Action
Location
View or end iSCSI sessions
1. Select Settings > System.
2. Scroll down to iSCSI settings, and then select View/End iSCSI Sessions.
or
1. Select Support > Support Center > Diagnostics tab.
2. Select View/End iSCSI Sessions.
View iSCSI statistics
1. Select Settings > System.
2. Scroll down to iSCSI settings, and then select View iSCSI Statistics Packages.
or
1. Select Support > Support Center > Diagnostics tab.
2. Select View iSCSI Statistics Packages.