WARNING: YOUR SEARCH IS LIMITED UNTIL YOU REGISTER AND LOG IN!

You can find and view some NetApp documents here without logging in. But some of them are restricted to registered customers. Register. It's free!

E-Series SANtricity Management Software Documentation - By Type

Hardware Flyer

Guided Problem Solving for E-Series SANtricity Management Software

E-Series SANtricity Management Software [Top]
DocumentsDescriptionView
fixed port-to-LUN mapping
Part No. 215-10426_A0
Allows user to enable or disable the fixed-port-to-LUN mapping feature. HTML
PDF

Upgrading E5400 or EF540 Controllers to E5600 or EF560 Controllers when Using Fibre Channel-iSCSI Split Mode
Part No. 215-10463_B0
If you want to upgrade the controllers and HICs in an E5400 controller-drive tray or EF540 flash array to E5600 or EF560 controllers and HICs and you are currently operating in Fibre Channel-iSCSI split-mode, you must install the new FC controllers and then apply a feature pack in SANtricity® Storage Manager to convert to split mode. HTML
PDF

Adding IOM Drive Shelves to an Existing E27XX, E56XX, or EF560 Controller Shelf
Part No. 215-14522_A0
Describes how to add IOM Drive Shelves to an existing E27XX, E56XX, or EF560 Controller Shelf PDF
Extending the life of an older E-Series array by putting it behind a new E-Series SAS-3 Controller Shelf
Part No. 215-14533_A0
This flyer describes how you can convert the controller shelf in an approved SAS-2 array (E2700, E5500/EF550, E5600/EF560) to a drive shelf and then place that shelf and any associated approved SAS-2 expansion shelves (DE1600, DE5600, DE6600) behind a new approved SAS-3 array (E2800, E5700/EF570) and approved SAS-3 expansion shelves (DE212C, DE224C, DE460C) for maximum performance and investment protection. PDF
Converting an InfiniBand HIC from iSER to SRP
Part No. 215-10427_A0
Describes how to convert an infiniband HIC from iSER to SRP. HTML
PDF